What Are the Cost of Solar Panels in Florida? - Solar Fuse
Questions Solar Panels

What Are the Cost of Solar Panels in Florida?

No Comments

Florida is often referred to as the “sunshine state.” As such many residents find it advantageous to utilize solar energy to power their homes. Solar power is increasingly becoming popular, not just in Florida but across the country as energy prices continue to surge. With the many costs associated with switching to solar many families end up asking how much it actually costs to switch to solar.


The factors that determine the cost of solar

There are several factors that will determine the price of solar panels here in Florida. Some of them include the size of the system, the equipment, and the installation company. This said you will note that the average cost of a solar panel system in the state of Florida is around 2.63 $ per watt. This means that for an average solar panel whose size is 6 kilowatts, the average price for such a system in Florida will approximately be $15,780. That is before any local or federal incentive.


One thing you should note is that the unit size of solar panels that are generally used in Florida is actually quite bigger than the average national unit which is about 9.5 kilowatts, therefore the price in this state is also lower than the average national price which is around three dollars.

How effective are solar panels?

Solar panels are able to effectively convert natural light into solar energy. With all this talk about alternative energy and the steady rising prices of fuel, there is a lot of interest in the cost of solar panels in Florida.


Now first off, solar power can be expensive – especially commercial solar arrays. It’s expensive to manufacture these and complicated engineering procedures are required. There are also very few companies in Florida that produce solar technology and this means there is less competition. As such, the cost of solar power technology is much higher because of this.


Embracing solar technology

But as the government and the public begin to show more interest in solar power technology, this technology is becoming a little bit affordable. One popular way to save money on solar panels is what’s called do it yourself panels. Basically, you can easily assemble your own solar panel arrays from kits. You can sometimes save 40 to 60 percent on the cost of solar panel technology by using these kits. Getting solar panel technology affordable has always been one of the problems with solar technology. But prices are expected to drop steeply over the next few years.


Cost of solar panels in Florida


solar panels



As per the actual solar technology prices, you can expect to pay about 500 bucks for each panel in Florida US. Prices can vary somewhat, but this figure includes the various electrical accessories you need with each panel. Hiring someone to install your panels will also add to the cost unless you opt to do it yourself. With do-it-yourself solar power technology, you can probably pay about 200 to 300 per panel in Florida US.



The state of solar power in Florida

Depending on the size of your household, you will pay between 10k to 30k to convert your entire house to solar power. However, if you just want to supplement some of your power needs, you can do that in a fraction of the time.


It has recently been discovered that the inorganic components used in the manufacturing of solar panels can be replaced by polymers with semi-conducting abilities. These polymers are capable of achieving high power conversions efficiencies and they are inexpensive to produce using a synthesized solution in a roll-to-roll process. Conjugated polymers are dispersed in various manners onto substances used to develop laminates that can be fashioned into low-cost electronics and photovoltaic components.


Power conversion efficiency


The processes are being developed that enable polymer-based solar cells to reach power conversion efficiencies of five percent. This will bring the cost of polymer-based PV to a level that can compete with the present grid-based electricity systems. Researchers in the field hope to develop material systems that can reach power conversion efficiencies above the ten percent level further lowering the cost of solar panels.


What is even better than future progress is the fact that you can make your own solar panels from easy to obtain materials at a reasonable expense. All things considered, you can build your own system for less than two-hundred U.S. dollars. A Photovoltaic system with solar charge controllers can reduce your electricity costs by as much as eighty percent. Although conserving energy whenever possible is still an important part of reducing your energy costs, you should incorporate any method available to build energy efficiency into your home prior to incorporating a residential solar panel system into your plans. Many people are not aware that even though the computer, TV or any other electricity using a piece of equipment in their house is switched off, they are still using power. The only way that these items are not using any power at all, is if it is switched off at the PowerPoint itself.


PV solar panels

Photovoltaic cells (PV) come in many types and sizes today. They will vary in length, width, and thickness. Usually around two inches thick, they can weigh around thirty pounds or less. Some PV panels are as large as five feet by three feet and can be rather cumbersome. Other types are made from flexible materials that can actually be rolled up.


Framed solar panels



solar energy



The industry standards are the framed solar panels. These are currently the best option for lowering the cost of solar panels. The number of panels needed to meet your needs depends on the amount of electricity necessary to supply the demand for power created by your household. The number of daylight hours that your system is able to function at the maximum output will influence this also. Used PV cells are available on e-bay for prices ranging from around fifty to one hundred U.S. dollars.


Normally, a battery regulator, is what should be used for small-sized solars for it is able to regulate the amount of power added or sourced from the batteries. It guards the system against excess voltage and overcharging which may result in damages.


The retailer in Florida from which the panels are bought is an important consideration. The same capacity panel can be sold for a different price depending upon the retailer. For the best deals, it is useful to go online and compare the prices. The more time that is spent checking out the various options, the greater the chance there would be of saving money.


Leave a Reply

Your email address will not be published. Required fields are marked *